If your graphic card doesn’t support Windows Aero Glass
here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber:If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber: http://www.mydigitallife.info/2006/12/17/force-enable-windows-aero-glass-or-wdm-on-unsupported-and-wddm-incomptible-graphics-card/
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber:If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber : If your graphic card doesn’t support Windows Aero Glass, here a trick that you can try to force Windows Vista to enable Windows Aero Glass on Non-WDDM Compatible or Not Aero Supported graphics accelerator card or processor, by disabling the check Windows Vista made to determines if your system hardware fulfills minimum requirements for Aero Glass window frame transparency.
Note: This method may or may not works with current RTM release of Windows Vista (user feedback welcome), and may cause a blue screen loop or constant flicker, so use with care and proper backup is a must.
1. Click on Start button, then select Run.
2. Type “regedit” (without the quotes). (If you do not turn of UAC, you have to run as administrator: Right click on Command Prompt accessible from All Programs -> Accessories, then select “Run as Administrator”, click on “Allow” from the Windows Security dialog, then run “regedit”.)
3. Browse or navigate to the following registry branch: HKEY_LOCAL_MACHINE\Software\Microsoft
4. Create a new registry branch called DWM. (If DWM doesn’t work, try to create and use WDM registry branch instead.)
5. Inside the HKEY_LOCAL_MACHINE\Software\Microsoft\DWM\ registry branch, create a new DWORD subkey called EnableMachineCheck.
6. Right click on EnableMachineCheck (or double click on it) to set the value to 0.
7. Repeat above two steps to create another DWORD called Blur, and set the value to 0.
8. Repeat again the steps to create another DWORD called Animations and set that to 0.
sumber: http://www.mydigitallife.info/2006/12/17/force-enable-windows-aero-glass-or-wdm-on-unsupported-and-wddm-incomptible-graphics-card/
Comments