Setting Modem di window Vista

Windows Vista - Configuring for Dial-In Access

Follow the instructions below to connect to the modem pool with Windows Vista.

Setting up your connection

1. Click the Start menu.
2. Then select Control Panel | Network and Internet | Network and Sharing Center.
3. Click on Set up a connection or network.
4. You will be asked to choose a connection option. Click on Set up a dial-up connection.

   

5. A list of modems will appear. Choose the modem you want to connect with. If no modems appear, you either do not have a modem on your computer or your modem is not installed properly. See Windows Vista - Troubleshooting Hardware Issues with Device Manager.
6. You will be asked to type in the information for your ISP. Type in the following information in the appropriate fields:
   
   • Dial-up phone number: 661-0326. If you need to enter any dialing rules, enter them before the phone number, separated by a comma (e.g. 9, 661-0326).
   • User name: Enter your NetID (e.g. bbadger)
   • Password: Enter the password associated with your NetID. If you do not want to enter the password every time you connect, place a check in the box next to "Remember this password."
   • Connection name: Enter a name you will remember it by (e.g. UW Modem Pool).

   

7. Click Connect. Your computer should now connect to the UW modem pool.
8. Once successfully connected, click on Browse the Internet now. Your default browser will launch.
9. To connect in the future, go to Start | Connect to. Your list of connections will show up. Choose the UW modem pool connections and click Connect.
   • If you using the 'Classic Start Menu,' you will not see Connect to in the Start Menu. If this is the case, select Start | Settings | Network Connections. Your new connection will be in the window that pops up.